weather resistant Q235NH steel with 6*1220*6000mm size

BEBON cpompany practice new development concepts, expand in an all-round way, deepen reform and innovation, speed up transformation and upgrading, become stronger, better and bigger, accelerate the implementation of BEBON Steel's industrial planning, and realize the revitalization and development of enterprisesFully implement the corporate market dominant position, comprehensively promote contractual management, and promote the transition from "internal production" to "market operation”,weather resistant Q235NH steel.

Weather resistant Q235NH steel,S355J2 is a European standard low alloy high strength structural steel grade, equivalent to Q345D. Because of its good impact toughness and welding performance, S355J2 steel plate is widely used in bridges, ships, power plant equipment, hoisting and transportation machinery, machinery manufacturing and other engineering and welding structures that bear high loads. S355J2 steel plate delivery status: hot rolled delivery, the specific delivery status should be indicated in the contract.

Weather resistant Q235NH steel,Weathering steel has good resistance to atmospheric corrosion. Although the initial investment cost of weathering steel is slightly higher than that of ordinary carbon steel. Compared with methods such as spraying anticorrosive coating on the surface of ordinary carbon steel, the later maintenance costs of ordinary carbon steel are weathering steel. 1.5-2 times. Therefore, weathering steel can reduce environmental pollution and is a key promotion technology for energy saving and emission reduction. Most domestic weathering steels are painted and used, and their original intentions of no-painting and "rust prevention" have not been exerted to a greater extent.

Weather resistant Q235NH steel,As the thickness and hardness of weather resistant Q235NH steel increase, the tendency to crack at the cutting edge increases. In order to prevent the from cutting cracks, preheating should be carried out before cutting. Special attention should be paid to preheating to make the entire interface evenly heated to avoid local overheating in the area contacting the heat source. If the whole cannot be preheated, the partial preheating method can be used instead,weather resistant Q235NH steel.

API 5L X52 steel with the thickness range is 1.2-40mm, the width range is 1220-4200mm, and the length range is 5000-18000mm. API 5L X52 steel’s mechanical properties is the yield strength 300MPa, and the tensile strength 460MPa. To be specified in details: Maximum content for C≤0.28%, Mn≤1.4%, P≤0.030%, S is 0.030%, V+Nb+Ti≤0.15%, Copper maximum is 0.50%, nickel maximum 0.50%, chromium 0.50%, Molybdenum 0.15%.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.
weather resistant Q235NH steel