The stock A387 gr 5 pressure vessel steel sheet prices in China is mainly stable

When cutting parts with gas, the verticality of the A387 gr 5 pressure vessel steel sheet section of the parts should not be greater than 15% of the thickness of the parts. There can be rounded corners at the sharp corners, but the radius should not be greater than 2.5mm. The concave and convex points at the edges of the parts should not exceed 1.5mm. If the parts are cut by hand, the verticality of the section shall not be greater than 15% of the thickness of the parts. If the parts are cut underwater, the verticality of the section should not be greater than 10% of the thickness of the parts.

A387 gr 5 pressure vessel steel sheet plate weight:
1) Theoretical weight of A387 gr 5 pressure vessel steel sheet plate:
The theoretical weight of a steel plate is the weight calculated based on the nominal size and density of the steel plate (previously called specific gravity). It is closely related to the length, size, and cross-sectional area of the steel plate.
2) The actual weight of A387 gr 5 pressure vessel steel sheet plate:
The actual weight of the steel plate refers to the weight obtained through actual weighing, which is more accurate than the theoretical weight.

We are a professional A387 gr 5 pressure vessel steel sheet steel raw material supplier with a history of 17 years. After years of development, the company's steel plates and coils are widely used in construction, machinery manufacturing, container manufacturing, shipbuilding, bridge construction and other fields around the world. With good product A387 gr 5 pressure vessel steel sheet quality, we have solid project cooperation with foreign governments or leading enterprises such as Egypt, Bangladesh, Myanmar, Thailand, Philippines, Vietnam, Venezuela, Peru, Mexico, the United States, Portugal, Russia, Iran, Iraq, Pakistan, etc.

Non-destructive flaw detection of steel plates is a test method for inspecting the A387 gr 5 pressure vessel steel sheet surface and internal quality of the inspected parts without damaging the working state of the workpiece or raw materials. Commonly used A387 gr 5 pressure vessel steel sheet steel plate flaw detection methods include: X-ray flaw detection, ultrasonic flaw detection, magnetic particle flaw detection, penetration flaw detection, eddy current flaw detection, gamma-ray flaw detection, fluorescent flaw detection, color flaw detection and other methods. Physical flaw detection is non-destructive flaw detection without any chemical changes.