Cost Of S690QL steel material 4'x8'x1

At the same time of doing well in production and operation, Yunnan company focused on completing the four phases of technical transformation construction projects, realizing industrial upgrading, improving equipment level, and laying a good foundation for the future development of the company In the technological transformation project, pollution control facilities have been built synchronously, and a large number of comprehensive utilization projects, such as comprehensive sewage treatment and recycling project, blast furnace gas waste heat and residual pressure power generation, have been invested and constructed,S690QL steel material.

The carbon S690QL steel material content of the pipeline steel is required to be low, and the strength of the pipeline steel is ensured by increasing the manganese content and adding trace elements such as niobium, titanium, vanadium and molybdenum. For pipeline steel, in addition to the required strength and plasticity index, the requirement for toughness index is an outstanding feature, including the impact energy of pipeline steel plate, impact transition temperature and toughness index of welding heat affected zone and welding metal. In addition, there are requirements for strain aging, weldability, stress corrosion and other indicators.

Different form S690QL steel material, boiler steel plate is one of the most critical materials in boiler manufacturing. Boiler steel plate mainly refers to the hot-rolled special carbon steel and low alloy heat-resistant steel plate used to manufacture important components such as the shell, drum, header end cover, support and hanger in the boiler. Boiler steel plates are often working under medium, high temperature and high pressure. In addition to withstand higher temperatures and pressures, boiler steel plates are also subject to impact, fatigue loads, and water and gas corrosion, resulting in poor working conditions.

S690QL steel material,Rolling of steel plates is the core of the entire steel rolling production process The billet is deformed by rolling The rolling process plays a decisive role in product quality The quality requirements of rolled products include the three aspects of product geometry and dimensional accuracy, internal organization and performance, and product finish Finishing: It is the last process in the rolling process, and it is also a more complicated process It plays a final role in guaranteeing the quality of the product,S690QL steel material.

S690QL steel material,12Cr1MoV steel is alloy structure steels, and it is usually produced into 12Cr1MoV steel coil, 12Cr1MoV steel sheet, 12Cr1MoV steel plate, 12Cr1MoV steel bar, etc. 12Cr1MoV steel is composed of Carbon, Silicon, Manganese, Chrome, Molybdenum and so on chemical elements. Amng them, the C content is 0.08-0.15, Si 0.17-0.37, Mn 0.40-0.70, Cr 0.90-1.20, Mo 0.25-0.35. The tensile strength of 12Cr1MoV steel is not lower than 490 Mpa, and yield strength is not lower than 245 Mpa.

S690QL steel material,Compared with other fast-moving consumer goods, steel consumption is obviously different, with a wide range of use and a long service life. Therefore, the quality and service of steel materials are particularly important. Service is always one of our top concerns, especially after-sales service. We have mature after-sales service team, and can help you solve problems professionally during application of the steel materials.