What is the maintenance of hot rolled A573 Grade 70 steel plate?

What are the maintenance and maintenance work of hot rolled A573 Grade 70 steel plate? In general, good results can be achieved by doing the following seven points:

1. Use soft cloths and towels for scrubbing tools. It is strictly forbidden to use corundum powder, sandpaper, wire brush or other abrasives to scrub the surface of the hot rolled A573 Grade 70 steel plate.

2. It is strictly forbidden to loosely load the hot rolled A573 Grade 70 steel plate during shipment, causing bumps.

3. When the surface of the hot rolled A573 Grade 70 steel plate transporter is eroded and polluted, it should be cleaned in time. The dirt can be wiped with a soft cloth first with alcohol or fragrance glue (wipe with alcohol first, if not, consider using fragrance glue). Rinse with clean water.

4. It should be cleaned with warm water containing lubricant or neutral cleaning agent. Acidic or alkaline cleaning agents are not allowed.

5. Soft cloth and towel are suitable for scrubbing utensils. It is strictly forbidden to use corundum powder, sandpaper, steel wire brush or other abrasives to scrub the surface of the hot rolled A573 Grade 70 steel plate.

6. After cleaning, the hot rolled A573 Grade 70 steel plate can be polished with high-quality topcoat protective wax, and a layer of acrylate-based varnish can also be sprayed evenly.

7. According to the environment of use, the hot rolled A573 Grade 70 steel plate should be cleaned regularly to maintain the brightness.