How to prevent scratches when processing stainless steel plate?

1. When preparing raw materials, the plates shall be placed face to face or back to back. In addition, attention shall be paid to the wearing condition of cutting tools and whether there is burr, etc.
2. During laser processing, it is necessary to first confirm whether the incoming materials are scratched, so as to check the quality of the incoming materials. If there is any scratch, it shall be returned and cannot be processed.
3. When bending the steel plate, first check whether there are impurities or foreign matters on the upper and lower die and the plate. If there are, the bending operation cannot be carried out to prevent the steel plate from being damaged.

4. When welding the steel plate, the welding workbench shall be kept clean and flat without any foreign matters. If any, it shall be removed in time.
5. If the product needs to be re coated, it shall be registered before operation.
6. If the parts are scratched, report it in time and handle it without delay.