How to improve the cutting quality and efficiency of Q345B thick steel plate？

1. Reasonably purchase plates and pay attention to the quality when purchasing Q345B thick steel plates.

Do not purchase Q345B thick steel plate when it is rusty or bent. The bending and deformation of the Q345B thick steel plate will increase the difficulty of cutting, and the cutting quality will easily deteriorate. After the cutting is completed, a sledgehammer is required to stop hammering and shaping, which affects the appearance of the product. When the Q345B thick steel plate rusts, it is easy to break the wire during the cutting process, and the cut surface is not flat. The rust dissolution point is higher than that of the Q345B thick steel plate. Small iron filings will explode from time to time during cutting, and the wound will cause unnecessary loss of consumables.

2. Improve cutting efficiency

The efficiency of cutting Q345B thick steel plate directly affects the application rate and cutting quality of steel. Nowadays, computer-aided systems are widely used, including the CNC cutting industry, so some advanced Q345B thick steel plate cutting technologies have been produced, such as full-time cutting, high-matching cutting, co-cutting, and parts bridge or connection.

3. Improve cutting quality

The quality of the quality of the Q345B thick steel plate affects the quality of the waste products, as long as the qualified parts are welded to the qualified products. Not only that, the application rate of data is also related to the cost of consumables. The cut parts only need to remove the surrounding burrs and iron filings to dissolve the slag, and then the next process can be stopped. However, if the parts are not properly cut, they need to be polished and shaped. Therefore, the quality of the Q345B thick steel plate is also very important.